- Exothermic welding process and application points of exothermic solder powder
2019-04-02
A good solder joint surface is full of light, no pores, and slag inclusions. After cutting, the profile is a whole without pores and flaws. The factors affecting the welding effect are the cleanliness of the mold and the object to be welded. If the dust, grease, oxides or other deposits on the surface of the object to be welded must be removed, it can be cleaned and polished before welding, otherwise the welding after welding The electrical and mechanical properties of the point will be affected. Another major cause of welding effects is moisture or moisture.
- Copper-plated round wire manufacturers: What are the lightning protection measures?
2019-04-02
Direct lightning protection: Mainly installed lightning protection needles, lightning protection lines, lightning protection nets, lightning protection belts, lightning arresters and other protective measures. It is required that the grounding resistance does not exceed 10 ohms. It is strictly forbidden to erect communication lines, broadcasting lines or other electrical lines on structures equipped with lightning rods and lightning protection lines; since the lightning receptors, down conductors and grounding devices subjected to lightning strikes exhibit high impact voltage, Spark discharge (lightning strike) may occur with adjacent conductors, so there should be sufficient safety distance.
- Grounding accessories manufacturers tell you the advantages of the grounding module
2019-04-02
The main body of the grounding module itself is a corrosion-resistant material, and its metal skeleton adopts a metal material whose surface is treated by corrosion resistance. Therefore, the grounding body has excellent corrosion resistance and has a service life of more than 30 years. It absorbs moisture and keeps it in contact with the soil and has low grounding resistance.
- Copper-clad steel ground rod manufacturers explain the cause of over-twisting of copper-clad steel strands and solve them
2019-04-02
Copper clad steel grounding rod manufacturers explain that copper clad steel strands can be transmitted as network signals and TV signals. The transmission rate is very fast. Any product needs good maintenance. If the copper clad steel strands are twisted, the inner or outer layer is single. At break, strand surface scratches, brittle fractures, arching, inclusions, etc., stranded scrap will occur, so be careful.
- Copper-plated round wire manufacturers for your science: Why should the electrical grounding wire?
2019-04-02
Those who have studied physics know that most of the electricity used in life is a single-phase 220 volt power supply. There are usually two wires in the house. One is a fire wire and the other is a zero wire. Although the neutral wire is not charged, there is no neutral wire. If you don't make a loop, you can't work; but we have a zero line. Why use electric appliances such as refrigerators, electric fans, washing machines, etc., but also the grounding wire? The following copper-plated round wire manufacturers tell you why.